PVSS00event - PARAM/WARNING - Source time outside valid limits (resource: validTimeDiff)

Enclosed you'll find the explanation for a log-message which can occur during runtime. The log-message is written to the PVSS_II.log-file.

PVSS00event (0), 2012.04.05 20:48:30.299, PARAM,WARNING, 20, Source time outside valid limits (resource: validTimeDiff), DP: System1:Plant1.signal.in:_original.._value, MAN: (SYS: 1 Driver -num 1 CONN: 1)


Log-message with symbolic names:

PVSS00event (0), <TIMESTAMP>, PARAM,WARNING, 20, Source time outside valid limits (resource: validTimeDiff), DP: <DPE-name>, MAN: (SYS: <system-number> <manager-type> -num <manager-number> CONN: <connection>)

 

This log-messages describes that the manager <manager-type> with the number <manager-number> was sending a message with a timestamp which is too far in the future. The message is discarded, it is documented with this log-message.
To solve the problem please check the time-settings for the servers and the client-computers, especially the computer where the manager (given at the log-message) is running.
If the log-message is written for a driver running on the server you have to check the time of data source for the driver. e.g. the PLC or an OPC-server.

The limits can be defined with the config-entries validTimeDiff and valueChangeTimeDiff.

Date added:
Last revised:
Hits:
9.362
Rating:
  • Current rating is 3.5 out of 5
Rating: 3.5. 83 vote(s).
83 anonymous votes No rating done at all.
Your vote was '' (0 of 5) You are an anonymous user.
You may log on to do personalized votings
 Click the rating bar to rate this item Please log on to do ratings

  • Notification

    FE user cannot be identified! (1403201096)

 go back