sensorGet()

Get reading data from a sensor.

Synopsis

int sensorGet(int sensor, string valueName, <any> &value);

Parameters

Parameter Description
sensor Index of the sensor.
valueName Name of the value that will be retrieved, it depends on the respective sensor. For possible Values, see the table below. All sensors know the options "description" (string) and "busy" (bool).
value Anytype vector, in which the reading is saved.

Sensor Type (valueName) Data type Description
All sensors
description string Description of the sensor.
busy bool Indicator if a sensor is free or already in use.
Accelerometer
x, y, z float Contains the acceleration on the X, Y or Z axis.
Altimeter
altitude float Altitude in meters relative to mean sea level.
AmbientLightSensor
lightLevel string

Contains one of the following:

  • Undefined: light level is unknown

  • Dark

  • Twilight

  • Light

  • Bright

  • Sunny
AmbientTemperatureSensor
temperature float Contains the ambient temperature in degree Celsius.
Compass
azimuth float Contains the azimuth of the device. The value is measured in degrees from magnetic north in a clockwise direction based on the top of the device.
calibrationLevel float Contains the calibration level of the reading. Measured as a value from 0 to 1 with higher values being better.
Gyroscope
x, y, z float Contains the current angular velocity measured in degrees per second. This defines the movement of the device around the X, Y and Z axis.
HolsterSensor
holstered bool Indicates whether the device is holstered.
LightSensor
fieldOfView float The angle that represents the field of view of the sensor. Not all light sensors support retrieving their field of view. For sensors that do not support this property, the value will be 0.
lux float Contains the light level in lux.
Magnetometer
x, y, z float Contains the raw magnetic flux density on the axis.
calibrationLevel float

Contains the accuracy of the reading. Measured as a value from 0 to 1 with higher values being better.

Note that this only changes when measuring geomagnetic flux density. Raw magnetic flux readings will always have a value of 1.
OrientationSensor
orientation string

The orientation fo the device:

  • Undefined: Orientation is unknown

  • TopUp: The top edge of the device is pointing up

  • TopDown: The top edge of the device is pointing down

  • LeftUp: The left edge of the device is pointing up

  • RightUp: The right edge of the device is pointing up

  • FaceUp: The face of the device is pointing up

  • FaceDown: The face of the device is pointing down

The orientation sensor reports the orientation of the device, not the UI. The orientation of the device will not change just because the UI is rotated. This means that the sensor cannot be used to detect if a device is in portrait or landscape mode.
PressureSensor
pressure float Contains the measured atmospheric pressure in Pascal.
temperature float Contains the pressure sensor's temperature in degree Celsius. The temperature is usually different thatn the rempterature reported from AmbientTemperatureSensor.
ProximitySensor
close bool Indicates if something is close.
RotationSensor
x, y, z float Three angles that indicate the orientation of the device in three-dimensional space. Refer to the Qt Help for further information.
TapSensor
isDoubleTap bool Indicates whether the display was single or double tapped.
tapDirection string

Contains a combination of the following flags (separated by "|"):

  • Undefined: Direction is unknown

  • X: The tap was along the X axis

  • Y: The tap was along the Y axis

  • Z: The tap was along the Z axis

  • X_Pos: The tap was towards the positive X direction

  • Y_Pos: The tap was towards the positive Y direction

  • Z_Pos: The tap was towards the positive Z direction

  • X_Neg: The tap was towards the negative X direction

  • Y_Neg: The tap was towards the negative Y direction

  • Z_Neg: The tap was towards the negative Z direction

  • X_Both: Equivalent to X_Pos|X_Neg. Returned by devices that cannot detect the direction of a tap.

  • Y_Both: Equivalent to Y_Pos|Y_Neg. Returned by devices that cannot detect the direction of a tap.

  • Z_Both: Equivalent to Z_Pos|Z_Neg. Returned by devices that cannot detect the direction of a tap.
TiltSensor
xRotation, yRotation float Contains the angle of tilt in degrees of the device along the X and Y plane.

Return Value

If no reading is available yet, the function returns -1.

Description

Depending on the given sensor type and available measurements, this function retrieves the sensor data and saves it for further use.

Assignment

Mobile UI control functions

Availability

UI