Redundancy in the emergency mode

To leave the emergency mode in a redundant system (both nodes in the emergency mode) with uninterrupted operation, proceed as follows:

• Stop the node A. Take care that there is enough disk space on the disks monitored by host A.

• Set the DATA manager of node B to split mode with -dbg setSplitMode

• Start the node A again. The node starts in the split mode.

• Set the node A to SplitActive mode through the system overview panel.

• Stop the node B. Take care that there is enough disk space on the disks monitored by host B.

• Set the node A to redundant mode through the system overview panel.

• Start the node B. This node now recovers.