Functionality
If an alert transitions to a higher-priority area, a (“CAME” message) and a delay time is set for the target area, the initial area initially remains the current area. At the same time, time monitoring is started. Then there are three options:
- The value remains in the target range:
After the delay time has elapsed, the target area becomes the current area and a corresponding "CAME" message is generated.
- The value returns to the initial range:
The time monitoring is stopped and the initial state is reached again without generating a message.
- The value transitions to an area of even higher priority:
A "CAME" message is generated for the original target area. The time monitoring is then no longer active.
Whether a "CAME" message is then generated for the new area depends on its configuration of the delay time. If a delay time is configured, the cycle described above begins again. Therefore, if there is a delay time, the original target area becomes the current area, otherwise the new area becomes the current area.The delay time is only taken into account when a value change happens. If the system shuts down during the delayTime, after a restart the alerts will be immediately triggered.