Operations

The Operations tab contains two sections:

  • License Tickets and
  • Licenses

License Tickets

In the License Tickets section you can load license tickets and the license ticket is shown in the table:

Figure 1. Operations - License Tickets
The Load license tickets button, opens the Add tickets panel:
Figure 2. Add tickets
Copy and paste the ticket ID that you received via e-mail. You can also load tickets directly from a file (usually a .dat or .txt file). The default directory for the files is C:/Users/<userName>/license.
Note: Use one ticket number per line!

Licenses

Figure 3. Operations - Licenses

In the Licenses section you can Activate, /Deactivate or Update a license.

  • Load the license ticket you want to modify using the button on the left side.
  • Select the licenses and license options you want to change from the table on the right.
    Figure 4. Select License Options
  • Click the Activate/Deactivate/Update button and select whether you want to transfer the licenses into a software container (computer) or a hardware container (dongle).
  • If you want to update your license, select a license container from the drop-down menu and the update is triggered for the selected container:
    Figure 5. Select a license container for the update
    Note: You can select multiple licenses by holding the CTRL key and selecting the lines.
    Note: Multiple licenses from multiple tickets can be activated/deactivated/updated. Multiple licenses cannot be edited simultaneously if they have mixed statuses - for statuses, see the description below.
  • Click on OK to confirm the selection.

The table shows:

  • The license number
  • The license description
  • The activation time of the license
  • The container ID for which the license is being used
  • The status of the license - Activated, Deactivated or Available. Depending on the status, you can activate,deactivate or update a license:
    • Activated → you can deactivate
    • Available → you can activate
    • Update needed → A license can be updated when, for example, a license option expires and this license option is extended. In this case, the status is Update needed and the Update button is enabled. .

Filter

Figure 6. Operations - Filter

In the Licenses section you can filter the view. You can filter by following criteria:

  • Available licenses
  • Activated licenses
  • Only local containers
    Figure 7. Operations - Filter View